Pacific States Machinery Co

Estate Liquidation Oregon City, Oregon
Call or Email now to arrange an inspection.
We are accepting offers, everything sells.
NOTE: Check back for updates and additions.

15 H.P. Wayne, 2 Stage Air Compressor

Price: $1,850

Click to view larger photo...      Request a quote on Stock Number: 2501Request A Quote On This Item


Equipped With:
SpecificationDescription
Tank60" x 24"
  Gallons

16 ga x 120" Chicago, Dreis & Krumpf Apron Brake

Price: $2,950

Click to view larger photo...      Request a quote on Stock Number: 2509Request A Quote On This Item


Equipped With:

2 Ton Budget Hoist

Model: 2 Ton      Age:

Price: $1,250


Equipped With:
Pendant Control Up/Down
SpecificationDescription
Motor (220/3/60) 

2 Ton Duff Norton / Coffing Hoist

Model: 2 Ton      Age:

Price: $1,250


Equipped With:
Pendant Control Up/Down
SpecificationDescription
  

24" Do All Geared Drill Press, W/Power Down Feed

Model: DEP 24      Age: 1981

Price: $2,250

Click to view larger photo...      Request a quote on Stock Number: 2503Request A Quote On This Item


Equipped With:
5/8" Jacobs Chuck, Powered Down Feed
SpecificationDescription
Spindle Speeds90-3360 RPM
Drills To Cut In Circle24"
Table Size24" x 20"
Spindle Taper (7/8")#3 MT
Down Feeds (3).004, .006, .010 IPR
 10, 15, 25 mm/REV
Dims - 24" x 30' x 76" 
Vertical Head Travel10"
Vertical Table Travel19"

26" Barnes Drill Press, Flat Belt Drive, W/ Power Down Feed

Model: 26"      Age:

Price: $250


Equipped With:
Round Table, Power Down Feed; Elevating Table and Drill Head
SpecificationDescription
Number of Speeds, with Back Gear8
Feeds (8).006 to .064 IPR
Floor Space (DxWxH) (spindle up)54" x 21" x 102"
Weight (approx)1200 lbs

Milaukee Magnetic Drill

Price: $850

Click to view larger photo...      Request a quote on Stock Number: 2651Request A Quote On This Item


Equipped With:
Forward / Reverse; Lock / Unlock; Jacobs 5/8" Chuck No. 16N
SpecificationDescription
Motor (115/1/60)12.5 amp
  

2" x 60" Burr King Model 760 Belt Grinder

Model: 760      Age: 1989

Price: $1,350

Click to view larger photo...      Request a quote on Stock Number: 2638Request A Quote On This Item


Equipped With:
Tool Rest; Quick Change Belts;Cast AL Frame; On / Off Switch
SpecificationDescription
Model NumberModel: PT55-760MC200B
Belt Size2" x 60"
Motor 208-230/460/3/602 HP
Belt Speed8000 SFPM
TYPES of Grinding 
Contact Wheel Grinding 
Loose Belt Grinding 
Work Table Grinding 
Platen Grinding 

2.5" x 60" Burr King Model 960 Belt Grinder

Model: 960      Age: 1989

Price: $1,350

Click to view larger photo...      Request a quote on Stock Number: 2639Request A Quote On This Item


Equipped With:
Tool Rest; Quick Change Belts;Cast AL Frame; On / Off Switch
SpecificationDescription
Belt Size2.5" x 60"
Motor 208-230/460/3/602 HP
Belt Speed8000 SFPM
TYPES of Grinding 
Contact Wheel Grinding 
Loose Belt Grinding 
Work Table Grinding 
Platen Grinding 

20" Rutland Disc Sander W/ tilting Table

Model: DS20      Age: 1987

Price: $1,050

Click to view larger photo...      Request a quote on Stock Number: 2627Request A Quote On This Item


Equipped With:
Tilting Table

Excello Double End Tool Grinder

Price: $450

Click to view larger photo...      Request a quote on Stock Number: 2628Request A Quote On This Item


Equipped With:
Tilting Tables; Grinding Wheels
SpecificationDescription
Tilting Tables12" x 8"
Motor (220/440/3/60)1 HP

10" x 15" Clausing 2 Axis Hyudraulic Surface Grinder

Model: 4020      Age:

Price: $4,500

Click to view larger photo...      Request a quote on Stock Number: 2504Request A Quote On This Item


Equipped With:
Walker Ceramex 10" x 15" Permanent Magnetic Chuck, Bijur Lube, Coolant
SpecificationDescription
Vertical Travel 
Maximum Height To Center of Wheel17 1/2"

Themac Model J7 Tool Post Grinder

Model: J7      Age:

Price: $1,450

Click to view larger photo...      Request a quote on Stock Number: 2650Request A Quote On This Item


Equipped With:
Storage Box, ID Spindles, Grinding Wheels: 3 @ ID Arbors, 2@ Wheel Dressers; 3 Speed Hubs; Various Grinding Wheels.
SpecificationDescription
For Lathes 13" or Larger 
Motor (115/1/60)1 HP
Speed Range3,900 to 27,000 RPM
Full Load Speed7500 RPM
Maximum Wheel Capacity6"
Weight34 lbs

Holdridge No. 12D Radii-Cutter

Model: 12D      Age:

Price: $1,050

Click to view larger photo...      Request a quote on Stock Number: 2649Request A Quote On This Item


Equipped With:
Model 12S
Popular Radii-Cutter for lathes 15" and larger and will cut from 0" to 12" Convex ball shapes and from 0" to 12" concave sockets to radius depth. By reversing the "C" yoke, sockets up to 24" in diameter may be formed. However, radius depth will be minus 3/4" to allow for the "boss" line of the tool. Compound height from the base of the tool to the centerline is adjustable from 1-5/8" to 1-3/4". Tool may be shimmed to fit various model lathes and turret lathes.

Model 12D includes:
Standard equipment plus One "C" yoke for 0 - 4" Concave, 0 - 3" convex, one "C" yoke for 3" to 7-1/2"convex, one "C" yoke for 7-1/2" to 12" convex, one "S" yoke for 4" to 12" concave cuts only, one 1-5/16" diameter straight spindle yoke, one 2-1/2" diameter straight spindle yoke, one 30 or 45 degree offset tool bit 5/8" diameter with ¼" bit, three 5/8" diameter carbide tool bits, one ½" diameter carbide tool bit, dial calibrated in degrees, parallel micrometer bar, tie down plate, tool bit support, five (5) Allen wrenches, handle extension, grinding fixture.


Holdridge No. 4D Radii-Cutter

Model: 4D      Age:

Price: $650

Click to view larger photo...      Request a quote on Stock Number: 2648Request A Quote On This Item


Equipped With:
Model 4S
Popular Radii-Cutter for medium lathes will cut from 0" to 4" Cjonvex ball shapes and from 0" to 4" concave sodkets to radius depth. By reversing the "C" yoke, sockets up to 12" in diameter may be formed. However, radius depth will be minus 17/32" to allow for the "boss" line of the tool. Compound height from the bse of the tool to the centerline is adjustable from 1-5/8" to 1-3/4". Tool may be shimmed to fit various model lathes and turret lathes.

Model 4D includes:
Standard equipment plus dial, calibrated in degrees, 1/2" yoke, 3/4" yoke, 1-1/2" yoke; two3/8" tool bits, 1/2" offsetr carbide tipped tool bit.

14" x 30" American Pacemaker Engine Lathe

Age: 1952

Price: $1,250

Click to view larger photo...      Request a quote on Stock Number: 2506Request A Quote On This Item


Equipped With:
12" Cushman, 10-104-12-L01B (K7), Aloris CxA Tool Post, Albreicht Keyless Chuck
SpecificationDescription
Spindle Speeds (27)30-2000 RPM

24" x 120" Mori Seiki Precision Engine Lathe w/ 3" HIS

Age: 1981

Price: $34,500

Click to view larger photo...      Request a quote on Stock Number: 2357Request A Quote On This Item


Equipped With:
15" Cushman 3 Jaw; 16" 4 Jaw; Aloris DA Toolpost w/ Holders; 22" Face Plate; Steady Rest; Follower Rest; Coolant. Additional Tooling is include.
SpecificationDescription
Swing Over Ways24"
Distance Between Centers120"
Spindle Bore3"
Spindle NoseD1-8
Spindle Speeds (12)27 - 1205 RPM
Electrics220/3/60
Floor Space180" x 48" x 54"
Weight (approx)10,000 lbs

6" Kurt Anglock Vise w/ Swivel Base

Model: B      Age:
Click to view larger photo...      Request a quote on Stock Number: 2647Request A Quote On This Item


Equipped With:
3 Way Handle, Standard Handle, Swivel Base

Criterion DBL-203 Boring & Facing Head

Model: DBL-203      Age:
Click to view larger photo...      Request a quote on Stock Number: 2646Request A Quote On This Item


Equipped With:

Gorton No 30 Collet Chuck No. K-7233 w/13 Collets

Model: K-7233      Age:
Click to view larger photo...      Request a quote on Stock Number: 2645Request A Quote On This Item


Equipped With:
Quick Change Collet Holder
SpecificationDescription
Collet Chuck Includes13 Collets
  

Erickson No. 30 Collet Chuck w/ 12@ Collets

Model: QC30TG100394      Age: 4/87
Click to view larger photo...      Request a quote on Stock Number: 2642Request A Quote On This Item


Equipped With:
12@ Collets
SpecificationDescription
Smallest Collet 100TG0250 / 03017CC41/4"
Largest Collet 100TG10001" 10016CJ4

No 30 Erickson End Mill & MT Holders

Click to view larger photo...      Request a quote on Stock Number: 2643Request A Quote On This Item


Equipped With:
8 @ End Mill Holders; 1 @ MT3 Holder
SpecificationDescription
8 @ End Mill Holders 
1 @ MT3 Holder 

Shell Mill / Face Mills 5 pieces

Click to view larger photo...      Request a quote on Stock Number: 2644Request A Quote On This Item


Equipped With:
5 @ Face Mills
SpecificationDescription
5 @ Face Mills 
  

12" x 48" Gorton Vertical Turret Mill

Model: 1-22      Age:

Price: $4,500

Click to view larger photo...      Request a quote on Stock Number: 2502Request A Quote On This Item


Equipped With:
2 Axis Heiden Hain DRO, Longitunal Power Feed, Vertical PowerFeed, Powered Spindle Feed, DYNA Drive II Table Feed, Nice Condition
Some No. 30 Tooling Included
SpecificationDescription
Table 
Longitunal (X)24"
Cross (Y)12"
Vertical Travel14"
Over Arm Travel15"
Min. Distrance Spindle Nose (To Table)6"
Spindle TaperNo 30
Spindle Travel4"
Spindle Speeds65 - 4600 INF U.S.
Motor 220/440/3/602 HP
Dimensions70" x 70" x 91"
Weight (approx)2800 lbs

50 Ton Custom H Frame Hydraulic Shop Press

Model: 50 Ton      Age:

Price: $3,200

Click to view larger photo...      Request a quote on Stock Number: 2636Request A Quote On This Item


Equipped With:
6 Position Bed Height Adjustment, Manually Adjusted with Ram; Left - Right Positioning Ram; Tractor Control; Pressure Gauge
SpecificationDescription
Distance Between Uprights48"
Min / Max Bed to Ram Height3.25" - 33"
Stroke7.5"
Diameter of Ram3.5"
Diameter of Cylinder (OD Cyl / Packing)8" / 5.5"
Width of Bed17"
Dimension of Vertical Beams6" x 11"
Floor Space (LxWxH)60" x 60" x 96"
Motor 230/460/3/6010 HP
Hydraulic Tank Dimension30" x 30" x 18"

100 Ton Custom H Frame Hydraulic Shop Press

Model: 100 Ton      Age:

Price: $4,950

Click to view larger photo...      Request a quote on Stock Number: 2637Request A Quote On This Item


Equipped With:
3 Position Bed Height Adjustment, Manually Adjusted with Ram; Bed Pin Diameter 3 @ 1.25"; Left - Right Positioning Ram;
SpecificationDescription
Distance Between Uprights 
Min / Max Bed to Ram Height3.75" - 27"
Stroke 
Diameter of Ram3.5"
Diameter of Cylinder (OD Cyl / Packing)8" / 5.5"
Bed Dimensions27" X 18"
Dimension of Vertical Beams6" x 11"
Floor Space (LxWxH)96" x 84" x 118"
Motor 230/460/3/6010 HP
Hydraulic Tank Dimension 

10" x 20" Emerson Horizontal Bandsaw

Model: 10 x 20      Age:

Price: $1,950

Click to view larger photo...      Request a quote on Stock Number: 2500Request A Quote On This Item


Equipped With:
Coolant, Length Gauge, Hyudraulic Downfeed, Blade Tension Gauge, Feed Pressure Control, Quick Acting Cam Lock Vise.
SpecificationDescription
Capacity Round10"
Capacity10" x 20"
Blade Dimensions12'x 1" x.032
Motor (230/3/60)2 H.P.
Dims.76" x 22" x 46"

36" DoAll Vertical Contouring Band Saw

Model: 3613-3      Age:

Price: $3,950

Click to view larger photo...      Request a quote on Stock Number: 2499Request A Quote On This Item


Equipped With:
Electric Blade Speed
SpecificationDescription
Speed0-5200 FPM
Vertical11 1/2" Handwheel
  13: W/O Handle
Saw Blade Length125" or 175"
File Band Length123" or 174"
Voltage230/3/60

4' x 16 ga Shear, Mechanical Drive

Price: $950

Click to view larger photo...      Request a quote on Stock Number: 2653Request A Quote On This Item


Equipped With:
SpecificationDescription
  
  

Kwikrimp K201 Hydraulic Hose Fitting Crimper

Model: K201      Age:

Price: $650

Click to view larger photo...      Request a quote on Stock Number: 2652Request A Quote On This Item


Equipped With:
Manual Hydraulic Pump
SpecificationDescription
  
  

Call or Email now to arrange an inspection.


Machinery
Pacific States Machinery Co
PO Box 3038
Clackamas, OR 97015-97015
Phone: 503-722-5117
Fax: 503-296-2178
Email: sales@PacificStatesMachinery.com



Pacific States Machinery Co respects the rights of our customers
If you do not wish to receive updated inventory e-mails,
please reply to sales@PacificStatesMachinery.com