14" Scotchman CPO350 LTPKPD Cold Saw Semi Automatic
Stock Number: 3056
Condition: New
| Specification | Description |
|---|
| Blade Speed, 2 Speeds | 22 to 44 RPM |
| Tubing | |
| Round 90 degrees | 4.5" |
| Round 45 degrees | 4" |
| Square 90 degrees | 4.5" x 4.5" |
| Square 45 degrees | 4" x 4" |
| Rectangular 90 degrees | 5.5" x 4" |
| Rectangular 45 degress | 4" x 4" |
| | |
| Solid Material | |
| Round 90 degrees | 2" |
| Round 45 degrees | 1.75" |
| Square 90 degrees | 2" x 2" |
| Square 45 degrees | 1.75" x 1.75" |
| | |
| Motor | 3 HP |
| Voltage **Specifiy** | 208/230/460/3/60 |
| | |
| Maximum Blade Diameter | 14" |
| Arbor Bore | 1.5625" |
| Pin Spacing | 4/12/64 |
| Dimesions | |
| Width of Machine | 21.875" |
| Height Excluding Handle | 56.25" |
| Height Floor to Vise | 37.4375" |
| Shipping Weight | 675 lbs |
Equipped With:
Low Turn; Power Clamping; Power Down Feed; Coolant;
Semi-Automatic Cycle; Pneumatic Power Down Feed with Electric Controls; Separate Feed Control of both Feed Rate and Feed Pressure; Double Self-Centering Vise Assures Burr-Free Cuts; Air-operated clamp for material vise; Emergency Stop Button; Miter Capabilities 45 degrees Left and 45 degrees Right; Miter Locking Devise: quick, accurate setting-stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right; Capable of Slotting; Two Cutting Speed Ranges; Double Reduction, Hardened and Ground Worm and Wheel Gear Box; Worm Wheel of Top Quality Bronze; 7 Gallon Coolant Tank with Pump; 30" Material Length Stop; One 12-1/2" Diameter (315 mm) HSS Blade; One Blade Wrench; One Gallon Concentrated Coolant; 230 or 460 Volt /3 Phase Electrics (must specify voltage); Warranty: One Year Parts; Made in USA
PART #72657 350 ECONOMY FABRICATING PACKAGE INCLUDES:
Four 12-1/2" Diameter Saw Blades (Must specify number of teeth),
One 10 foot Material Supply Track (Roll Case),
One 120" Material Stop Track with Left Hand Quick Loc,
One set of Square Tube Diagonal Vise Jaws
One Mag Brush used for Machine Chip Removal.
Retail Price: $2,871.00 Savings: $896.00 Package Price: $1,975.00
PART #72659 350 ECONOMY FABRICATING PACKAGE INCLUDES:
Four 12-1/2" Diameter Saw Blades (Must specify number of teeth),
One 10 foot Material Supply Track (Roll Case),
One 120" Material Stop Track with Right Hand Quick Loc,
One set of Square Tube Diagonal Vise Jaws
One Mag Brush used for Machine Chip Removal.
Retail Price: $2,871.00 Savings: $896.00 Package Price: $1,975.00
Package Price: $1,795.00
Pacific States Machinery Co
PO Box 3038
Clackamas, OR 97015-97015
503-722-5117
sales@PacificStatesMachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
